NGP 884 Aluminum Latching Panic Exit Threshold, with Thermal Break and Choice of Seals, 6"- 8" Widths, .875" Height
NGP 884 Latching Panic Exit Threshold is designed to be used with a surface applied vertical rod exit device and as a door bumper with a seal at the bottom of doors. The thermal break creates a separation to prevent the transfer of outside temperature and frost through the threshold. It has a full height of .875". Available in two aluminum finishes and a choice of seals. Length is custom cut to size.
PRICED PER FOOT - See full product details and specs in the tabs below
NGP 884 Latching Panic Exit Threshold with Thermal Break Key Features:
Threshold design is compatible with a surface applied vertical rod exit device.
Material: Aluminum Alloy 6063, T5 Temper
Width: 6", 7", or 8". Choose from the options above.
Height: .875" (7/8")
Length: Custom cut to size
Typical Wall Thickness: .109"
Weight: 1.10 lbs./ft. for 6", 1.31 lbs/ft. for 7", 1.52 lbs./ft. for 8"
Inserts: Gray Vinyl, Black Silicone, Black NGP-TPV, Gray Pile
Compliance Details: Air Infiltration Tested; UL Certified; Positive Pressure Certified.
Installation: See Installation Guide tab.
- If threshold is being drilled into concrete, an Expansion Anchor is recommended.
- #10 x 1-1/2” FH zinc plated wood screws provided.
- Dark Bronze Aluminum thresholds are supplied with dark bronze plated screws
Drilling: Threshold is drilled in standard factory locations.
Options (Can be purchased through our office at 845-388-1300):
- Slip Resistant Textured Finish
- Vinyl Foot Seal
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 3 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For additional thresholds see our NGP 8436 Latching Panic Exit Threshold, 6.125" Aluminum with Thermal Break and Choice of Seals, .875" Height
-
QuickShipNo
-
ManufacturerNational Guard Products
-
MPN884-6, 884-7, 884-8
-
Width6", 7", 8"
-
SealVinyl, Silicone, NGP-TPV, Pile
- Dimensions
-
Overall Height.875" Height
-
Overall Width6" Width, 7" Width, 8" Width
-
Threshold LengthCustom Cut to Size
-
Required Door Clearance1" Height
-
Thickness.109" Thick
-
- Product Design
-
Flat Saddle DesignFluted (Grooved) Design
-
Threshold TypeLatching Panic Exit Threshold, Thermal Break Threshold
-
Seal TypeVinyl Seal, Silicone Seal
-
MaterialAluminum
-
- Installation
-
Drilling HolesDrilling holes provided
-
FastenersFasteners Provided
-
- Finishes
-
FinishMill Finish Aluminum (US27), Dark Bronze Anodized Aluminum (313)
-
- Compliance Details
-
Warranty3 Year Limited Warranty
-