Pemko #EGA305XGSS Excessive Gap Solutions, Door Header, for gaps up to 1/2”
This Pemko Excessive Gap Solution is designed to restore lost fire ratings resulting from large gaps above doors up to 1/2". Pemko #EGA305XGSS combines Stainless Steel Angled Headers, Silicone Bulb Seals, Intumescent Strips and End Caps.
It can be used on steel composite, hollow metal doors, wood and plastic-covered composite core doors, with no special preparation needed beforehand.
PRICED PER PIECE
This Pemko Excessive Gap Solution is designed to restore lost fire ratings resulting from large gaps above doors up to 1/2". It's a quick and easy resolution to fire door inspection issues and eliminates the costly expense of replacing doors.
See Excessive Gap Door Solution Brochure for more information.
Pemko #EGA305XGSS Combines:
- (2) Stainless Angled Headers
- (2) S88 Silicone Bulb Seals
- (2) HSS2000 Intumescent Strips
- End Caps
Installation: This product can be used on steel composite, hollow metal doors, wood and plastic-covered composite core doors, with no special preparation needed beforehand.
Clearance: The clearance between the door face and frame should be more than 1/16". It can be used on gaps in excess of 1/8" and up to 1/2" for 90-minute rated openings.
Replacement:
- Replacement Seal #S88 Silicone Bulb Seal
- Replacement end plate kit is K450XG.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail.
This product has a 5 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For another great Pemko product which can seal door gaps on door bottoms, see our Pemko #325XGSSN Door Shoe Sweep.
-
QuickShipNo
-
ManufacturerPemko Manufacturing
- About this Product
-
Door Shoe Retainer MaterialStainless Steel
-
Door TypeSteel Composite, Metal Door, Wood Covered Composite Core Door, Plastic Covered Composite Core Door
-
Seal TypeNeoprene Rubber Seal
-
- Dimensions
-
Door Seal WeightEstimated per foot: 0.58 lbs
-
Total Height1-3/4" Height
-
Length36" Length, 42" Length, 48" Length
-
Door Thickness1-3/4" Thick
-
- Finishes
-
FinishStainless Steel
-
- Compliance Details
-
Compliance DetailsUL Classified, Non-Combustible, OSHA Compliant
-
Warranty5 Year Limited Warranty
-
UL Classified: – Excessive clearance solutions for door and frame clearances when installed per the manufacturer’s instructions, intended for use with UL Classified steel composite, hollow metal doors, wood and plastic covered composite core doors with UL Listed fire door frames up to 1-1/2 hour - up to 1/2".
NFPA80: Indicates that clearances (dimension from door edge to frame) around the top and vertical edges of a fire door are allowed to be: 1/8" for wood doors, 1/8" +/- 1/16" for metal doors. NFPA80 also indicates that the allowable clearance at the bottom of the door (dimension from bottom rail to top of finished floor) is allowed to be up to ¾" maximum.