Pemko #3151CR Door Bottom, 1.25" Aluminum Casing with .1875" Sponge Neoprene Seal
This door bottom, with a 1.25" sleek anodized aluminum casing, is fitted with a .25" thick sponge neoprene extrusion which is smoke, fire and air infiltration rated. It is surface applied to create a seal between the door bottom and threshold / floor surface to seal small gaps of approximately .1875". Available in anodized aluminum and is custom cut to size.
PRICED PER FOOT.
This door bottom is surface applied to create a seal between the door bottom and threshold / floor surface. It is fitted with a fire, smoke and air infiltration rated .25" thick sponge neoprene extrusion. Encased in a 1.25" high quality anodized aluminum casing, it is surely long-lasting and will provide ongoing superior performance and will not impede proper operation of door. The seal can fill small gaps of approximately .1875".
Installation Screws provided.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click here for our Full Warranty Policy.
Have a larger gap to fill? See our 1.25" Aluminum Casing with 1" Neoprene Seal.
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPN3151R
- About this Product
-
Door Shoe Retainer MaterialAluminum
-
Door TypeWooden Door, Metal Door
-
Seal TypeNeoprene Rubber Seal
-
MountingSurface Mounted
-
- Dimensions
-
Seal Height3/16" Height
-
Total Height1-7/16" Height
-
Additional DimensionsDoor seal is 1/4" thick
-
LengthCustom Cut to Size
-
- Installation
-
Drill HolesDrill holes are provided
-
- Finishes
-
FinishClear Anodized Aluminum (US28)
-
- Compliance Details
-
Compliance DetailsFire Rated, Smoke Rated, Air Infiltration Rated, BHMA Certified, UL Classified
-
ANSI DesignationR3B434
-
Warranty5 Year Limited Warranty
-
Click to View Ratings Explained
Finishes Comply with the Following ANSI / BHMA Codes:
- Clear Anodized Aluminum - US28 / 628