Pemko #159B Latching Panic Exit Threshold, 3.625" Interlocking Bronze with Seal, .5" H
This Interlocking Latching Panic Exit Saddle is designed to be used with a surface applied vertical rod exit device and as a door bumper with a double seal at the bottom of doors. It has a 5" width and a height clearance of .375". Available with thermo, vinyl or brush seal and has an interlocking design for extra protection. Length is custom cut to size.
PRICED PER FOOT
This product is also available in aluminum finishes, see our 3.625" Interlockign Latching Panic Exit Threshold with Seal, .5" H
This product is also available in aluminum finishes, see our 3.625" Interlockign Latching Panic Exit Threshold with Seal, .5" H
Threshold design is compatible with a surface applied vertical rod exit device. Additionally, threshold has an interlocking design.
Width: 3.625" (3-5/8")
Interior Saddle Height: .5" (1/2")
Door Clearance Height: .5625" (9/16")
Total Height: .875" (7/8")
Length: Custom cut to size up to 104" (larger sizes can be purchased through our office)
Available Seals: It can be purchased with either a thermo, vinyl and pile brush seal which compresses against the door to form a tight seal.
Thermo vs. Vinyl Seal: The thermo seal is a higher grade rubber than its vinyl counterpart and has a greater acoustic performance rating which creates a stronger soundproof seal. It has better performance than vinyl in extreme cold or hot temperature, and is recommended for locations with extreme weather. The vinyl seal wears quicker than thermo, so for best performance, apply vinyl in areas with light traffic abuse.
Interlocking Feature: Saddle has in interlocking feature, which ensures draft and dust protection on both sides of the door. It interlocks with a 'J Hook' (provided) which is applied to a rabbet under the door. Can be applied with or without the interlocking J Hook.
Finishes: Bronze mill finish (Oil rubbed bronze can also be purchased through our office for an additional 40% of standard bronze pricing)
Compliance Details: See Product Data tab to the right
Installation: Installation instructions and screws provided. Screws are colored to coordinate with saddle. If threshold is being drilled into concrete, an Expansion Anchor is recommended.
Drilling: Threshold is supplied drilled for easy installation
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For a wider threshold, see our 5" Aluminum or Bronze with Rubber or Pile Seal Latching Panic Exit Threshold.
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPN159T, 159V, 159P
-
Seal TypeThermo Seal, Vinyl Seal, Pile Seal
- Finishes
-
FinishBronze Mill Finish (Brass)
-
Threshold requires door clearance of .5625" (9/16")
Thermo Seal
Vinyl Seal
Pile Brush Seal
J-Hook (Provided):
Click to View Ratings Explained
Finishes Comply with the Following ANSI / BHMA Codes:
- Bronze Mill Finish (Brass) - US4 / 720