Pemko #3493 Meeting Stile, Aluminum, Locking Slide Bolt with Double Seal, In-swing Doors

This meeting stile has both pile and rubber seals to provide imperforated closure to the midline gap of single active in-swing doors. This product has many customization options and is supplied with an installation kit for your convenience. It can be surface applied or mortised for a neat, sleek look. See customization options below for additional functions.

Dimensions: This meeting Stile is for 1.75" thick doors. The Inactive door is fitted with an aluminum housing that cradles the door’s edge and extends more than .5” away from edge. It holds your choice of a vinyl or silicone pressure seal, as well as a pile brush seal. The housing contains the tube that holds an aluminum lock bolt mechanism (see product specs). 

For surface mounted installation, the midline gap must exceed .5”. To mortise for a neat look, a .5” cutout in the inactive door edge is required. See product specs and detailed images for visual representation.

Seals:  Choose from a silicone or a vinyl pressure seal. Silicone rubber does not become brittle and hard in the cold or very soft in the heat. This material has excellent resistance to sunlight, weather, ozone, oxidization, water and flames. Vinyl is durable, with good chemical resistance to adhesives and most mild cleaning solutions. It has only limited ultraviolet and weather resistance.

This rubber seal combined with the standard pile brush seal provide double protection from infiltration of unwanted elements and passage of temperatures between environments.

Lock Bolt: Meeting Stile is fitted with an economical, smooth acting bolt slide mechanism that is installed at the top and bottom of the meeting stile . Available in two sizes:

• 4" Throw: The standard version has an aluminum steel , 4.00” throw bolt with a  3/8" diameter and 1-1/16" throw for improved locking strength.
• 18" Throw for Easy Access: Option for a longer 18" (from the top and bottom) throw bolt is available for an additional fee, included in price when 18" is selected from options. Select required bolt from options above.

Handing: Please specify the handing of the active in-swing door in ‘Handing’  option above. Confused about handing? See How To Determine Door Handing or Swing of Door.

Customization Options: You can customize this meeting stile to accommodate existing door attributes.

Punchout Locations: If your door has a deadbolt or latchbolt, please contact us to order this product with custom punchouts at no additional cost.

Additional Features: Vinyl snap-in cover strip: Meeting stile comes with with a vinyl snap-in cover strip to conceal the slidebolt cutout and to cover the mounting screws.

Neoprene bottom seal: Product comes with a molded sponge neoprene bottom seal

Installation kit and detailed instructions provided. Kit includes: Two, four-way, adjustable, Top & Bottom Bolt Strike Plates and screws for attaching astragal to door edge and strike plates. Screws are colored to coordinate with casing.

Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.

This product has a 5 year guarantee against defects in material and workmanship. Click to view our Full Warranty Policy.

Many variations of meeting stiles for single active doors are available. See our Meeting Stile, Aluminum, Locking Spring Bolt with Magnetic Kerf-in Seal for In-swing Metal Doors