Pemko #252x3BFG Utility Threshold, 5.125" Bronze with Thermal Break, .5" (H)
Thermal Barrier Thresholds are manufactured with a rigid vinyl key separating two components to reduce the transfer of hot and cold temperatures from one side to the other. It has a height of .5" which is ADA Compliant. Length is custom cut to size.
PRICED PER FOOT
This product is also available is aluminum finishes, see our 5.125" Aluminum or Bronze Threshold with Thermal Break, .5" H
This product is also available is aluminum finishes, see our 5.125" Aluminum or Bronze Threshold with Thermal Break, .5" H
Threshold is fitted with a black rigid polypropylene break which reduces heat loss and prevents frost build up on the interior surface of the saddle.
Width: 5.125" (5-1/8")
Height: .5" (1/2")
Length: Custom cut to size up to 104" (Larger sizes can be purchased through our office)
Finishes: Bronze mill finish (Oil Rubbed Bronze can also be purchased through our office for an additional 40% of standard bronze mill finish price)
Compliance Details: ADA / Wheelchair Compliance, BHMA Certified, Fire Rated
Installation: Installation instructions and screws provided. Screws are colored to coordinate with door hardware. If threshold is being drilled into concrete, an Expansion Anchor is recommended.
Drilling: Threshold requires two rows of fasteners for installation. Drilling holes will be applied to the center line of each saddle piece for easy installation.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
For a 6” standard threshold , see our Utility Threshold, 6" Aluminum or Bronze with .5" Height.
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPN252x3_FG
- Finishes
-
FinishBronze Mill Finish (Brass)
-
Click to View Ratings Explained
Finishes Comply with the Following ANSI / BHMA Codes:
Bronze Mill Finish (Brass) - US4 / 720