NGP D648 Door Sweep, 1" Aluminum Casing with 1" Nylon Brush
NGP D648 Door Sweep is fitted with a nylon brush to seal the gap under doors. The brush is highly flexible and conforms well to surface irregularities. It can be mortised into a hollow metal door. Casing measures 1" H, while the brush portion has a height of 1". Available in two anodized finishes and length is custom cut to size.
PRICED PER FOOT - see product specs and details in the tabs below
NGP D648 Door Sweep is fitted with a nylon brush to seal the gap under doors. The brush is highly flexible and conforms well to surface irregularities. It can be mortised into a hollow metal door.
Brush Material: Black or Gray Nylon Brush. Seal has excellent abrasion resistance, flexibility and memory. It retains insecticides well and is moisture resistant, however it is not effective against water penetration.
Installation: Installation Guide and #6 x 3/4" stainless steel sheet metal screws furnished.
Mounting Options: This can be either mortised to hollow metal door or surface mounted on bottom of a wooden/metal door.
- Screws Only: Screw holes are slotted for easy adjustment once installed
- Screw + Adhesive: Available with Fast Attach Tape (FATT) for easy installation. Two way tape is applied to the metal housing, insuring a quick and easy installation. Self drilling screws are provided to further secure the metal.
Compliance Details: Reach and RoHS compliant; UL Certified; Positive Pressure Certified; see Compliance Details tab for more information.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 3 year guarantee against defects in material and workmanship.
Click here to view our Full Warranty Policy.
See also our NGP D620 Door Sweep/ Perimeter Seal with 1" Aluminum Casing and 1.0625" Nylon Brush.
-
QuickShipNo
-
ManufacturerNational Guard Products
-
MPND648
-
MountingScrews, Screws + Adhesive
- About this Product
-
Door Shoe Retainer MaterialAluminum
-
Temperature Range-70°F to 425°F
-
Door TypeWooden Door, Glass Door
-
Seal TypeNylon Brush Seal
-
MountingSurface Mounted
-
- Dimensions
-
Seal Height1" Height
-
Total Height1-3/8" Height
-
LengthCustom Cut to Size
-
- Installation
-
Installation Screws#6 x 3/4" stainless steel sheet metal screws provided
-
- Finishes
-
FinishMill Finish Aluminum (US27), Dark Bronze Anodized Aluminum (313)
-
- Compliance Details
-
Compliance DetailsSmoke Rated, UL Classified
-
Warranty3 Year Limited Warranty
-