Meeting Stile, 1.375" Aluminum Track with EPDM Bulb Seal, .75" Clearance
Seal the gaps between double doors with this aluminum track meeting stile and EPDM bulb seal. The bulb design is a safety feature that prevents fingers from being hurt when caught between the doors, without minimizing seal effectiveness. Surface mounted application. Available in various different finishes and is custom cut to size.
PRICED PER FOOT
When ordering for both doors, set 'Quantity' to 2.
This meeting stile is both a safe and effective seal that prevents the infiltration of drafts, moisture, dust, insects and light, while simultaneously preventing fingers from being caught between the doors. Available in three finishes and is custom cut to size.
Key Features Include:
Seal: This Meeting Stile is fitted with an EPDM Bulb Seal. EPDM is comparable to Neoprene Rubber but is more environmentally friendly and has overall better performance than neoprene. EPDM has great soundproofing properties and is resistant to solvents. It is very flexible in all weather conditions and conforms to surface irregularities.
Application: Meeting Stile is surface mounted to the edge of the door. The seal is screwed into the the door edge and compresses against the opposite door to provide a proper seal.
To seal larger gaps of up to 1.5" between double active doors, install this bulb seal on the edges of both doors. Measure required length for one door and set 'Quantity' to 2.
Dimensions: Meeting Stile measures 1.375” wide and, when installed on one door, can fill gaps of up to .75”. See product specs. A seal on both doors can seal gaps as large as 1.50".
Casing: This meeting is made of high quality Aluminum.
Finishes: Available in clear anodized aluminum and dark bronze anodized aluminum.
- Meeting Stile Compatible with Double Active Doors
- Surface Mounted Application
- Large bulb finger safety seal
- Fills Gaps of .75" - 1.50"
- Three aluminum finishes
- Custom Cut to Size
Installation Guide and screws provided. Screws are colored to coordinate with casing.
Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail. See product specs for exact measurements.
This product has a 5 year guarantee against defects in material and workmanship.
Click to view our Full Warranty Policy.
To see a similar Bulb seal meeting stile with smaller dimensions, see our Meeting Stile, Mortised Aluminum with EPDM Bulb Seal
-
QuickShipNo
-
ManufacturerPemko Manufacturing
-
MPN314MS
- Finishes
-
FinishClear Anodized Aluminum (US28), Dark Bronze Anodized Aluminum (313)
-
Product Specs |
Click to Print Product Specs |
Compliance Details |
Finishes Comply with the Following ANSI / BHMA Codes:
|
Click to Print Installation Guide