Securitron Magnalocks and Access Control Hardware

Securitron Magnetic Locks and Access Control Hardware

Securitron, part of ASSA ABLOY's Electronic Security Hardware portfolio, manufactures electromagnetic locks, access control components, power supplies and accessories for commercial security applications. TM Hardware lists Securitron Magnalocks, specialty locking products, mounting hardware, exit devices, keypads, power management components and related accessories.

When selecting Securitron hardware, consider the door construction, required holding force, mounting space, environmental conditions, access control equipment and applicable life-safety requirements. The lock and its accessories must be compatible with the opening and the complete access control system.

For more options, explore our electromagnetic locks category to compare additional magnetic locking solutions for commercial doors and access control systems.

Securitron Magnalock Series: Which Model Should You Consider?

Securitron Magnalocks are electromagnetic locks used in access-controlled openings. Different models offer different holding forces, mounting configurations and application characteristics. The following guide highlights the principal Magnalock families available in our product range.

M32 Magnalock: 600 lb Holding Force

The Securitron M32 is a 600 lb holding-force electromagnetic lock for compatible access-controlled doors. It is an option to consider for interior access-controlled rooms and other applications where the door does not require a higher holding-force model. The M32 is also listed as weather-resistant by the manufacturer.

Depending on the selected configuration, M32 options can include BondSTAT magnetic bond monitoring and a door position switch. Confirm the exact model suffix, monitoring requirements and mounting space before ordering.

M38 Magnalock: 600 lb Holding Force for Indoor Use

The Securitron M38 is a 600 lb holding-force Magnalock identified for indoor use. Consider it when the application calls for an electromagnetic lock in an indoor environment and its holding force and mounting configuration suit the opening.

For installations that may be exposed to weather, review the manufacturer's environmental ratings and compare the appropriate model before specifying the lock.

M62 Magnalock: 1,200 lb Holding Force

The Securitron M62 provides a 1,200 lb holding force and is identified as weather-resistant. It is an option for compatible access-controlled openings where the application calls for more holding force than the M32 or M38 provides.

Review the available monitoring options, door and frame construction, mounting space and electrical requirements. Select the exact configuration based on the project's security and access control specifications.

M68 Magnalock: 1,200 lb Holding Force for Indoor Use

The Securitron M68 is a 1,200 lb holding-force electromagnetic lock intended for indoor use. It may be worth considering for interior openings that require this holding-force class and support the model's mounting configuration.

Verify the installation environment and model specifications before choosing the M68 over a weather-resistant option.

M82 Magnalock: 1,800 lb Holding Force

The Securitron M82 is a weather-resistant Magnalock with a 1,800 lb holding force. It is designed for compatible applications that call for a higher holding-force model.

Before specifying the M82, confirm that the door, frame, mounting surface and supporting hardware are suitable for the installation. A higher holding-force rating alone does not establish that a lock is appropriate for every opening.

M680E and M380E EcoMag Magnalocks

The Securitron M680E and M380E EcoMag models are additional electromagnetic lock options in the available product range. Compare these models with the standard M68 and M38 families when reviewing the requirements of an access-controlled opening.

Check current manufacturer documentation for holding force, electrical specifications, mounting requirements, environmental suitability and available monitoring features before choosing a model.

DM62 Double Magnalocks

The Securitron DM62 is a double Magnalock product listed with a 1,200 lb holding-force rating and weather-resistant construction. It is an option to review for compatible applications requiring a double-lock configuration.

Confirm the door arrangement, number of locking points, mounting requirements and manufacturer's installation guidance for the specific configuration.

M34R Recessed Magnalock

The Securitron M34R is a recessed Magnalock option. Consider it when reviewing installations where a recessed locking arrangement is required, subject to the manufacturer's door, frame and installation requirements.

SAM and SAM2-24 Shear-Aligning Magnalocks

The Securitron SAM and SAM2-24 are shear-aligning Magnalock options. Shear-aligning designs use a different locking and mounting arrangement from conventional surface-mounted electromagnetic locks.

Review these models when the installation calls for this type of locking arrangement. Confirm the exact holding-force rating, door preparation, alignment requirements and compatibility with the opening before specifying either model.

MM15 MEMLOCK and DEM680E EcoMag Delayed Egress

The Securitron MM15 MEMLOCK combines magnetic and mechanical locking features. The DEM680E EcoMag is listed as a delayed-egress Magnalock product.

These are specialized products rather than direct substitutes for every standard Magnalock. For delayed-egress applications, confirm the complete system design, required controls, applicable code provisions and manufacturer installation instructions.

Securitron Magnetic Cabinet Locks and Specialty Locks

In addition to conventional door Magnalocks, the product range includes locking solutions for cabinets and specialty openings.

• M32-SS and MCL magnetic cabinet locks: Options to review for compatible cabinet-locking applications.
• GL1 electromechanical gate lock: A specialty locking product for compatible gate applications.
• MUNL UnLatch strike for mortise locks: Designed for compatible mortise-lock configurations.
• UNL UnLatch strike for cylindrical locks: An option for compatible cylindrical-lock applications.
• EMB electromechanical bar: A specialty access control product for compatible installations.

Confirm the lock type, door or cabinet construction and operating requirements before selecting any specialty locking product.

Securitron Power Supplies and Power Distribution

Electromagnetic locks and other access control devices require an appropriate power source. Securitron offers power supplies and distribution components to support different system configurations.

AQD Series Switching Power Supplies

The Securitron AQD1, AQD2, AQD4 and AQD6 series provide power supply options for access control installations. The product range includes different capacity configurations, allowing the system designer to match the power supply to the connected equipment.

• AQD1 and AQD2: Review the specific model ratings for lower-capacity power requirements.
• AQD4: A dual-voltage 4 amp, 12/24 VDC power supply option.
• AQD6: A dual-voltage 6 amp, 12/24 VDC power supply option.

Choose a power supply by calculating the total current requirements of the connected locks, readers, control boards and other equipment. Verify output voltage, current capacity, battery backup needs, fire alarm interfaces and applicable listings for the exact unit.

AQL Intelligent Power Systems

The Securitron AQL product family includes intelligent power systems and supporting modules. Available products include the AQL4, AQL6, AQL102 and AQL104 series, along with AQL distribution, relay and monitoring components.

Review these products when planning a compatible access control power system that requires more than a basic power supply. Confirm system capacity, module compatibility, monitoring features and the requirements of the connected equipment.

PSP Power Supplies, BPSS and Solar Power Products

The listed range also includes PSP filtered regulated power supplies, BPSS solar power supplies, batteries, solar panel kits and related components.

• PSP series: Power supply options for compatible access control equipment.
• BPSS and B-12 battery products: Components to review for compatible solar power supply configurations.
• SPK 20-watt solar panel kit: A solar power component for compatible installations.
• SWK high-wind kit: A supporting accessory for the specified solar panel installation.

Solar-powered access control requires careful consideration of power consumption, charging, battery capacity, environmental conditions and the expected operating cycle. Confirm that all components are compatible with the intended system.

Securitron Exit Buttons, Sensors and Egress Hardware

Securitron offers exit and door-monitoring components that can work as part of compatible access control systems. The appropriate device depends on the egress method, control system and applicable life-safety requirements.

• EEB emergency exit buttons: Options for compatible emergency release applications.
• PB, PB2, PB3, PB4L and PB5 push buttons: Different button styles for compatible door release and control applications.
• SP-1 Capacitive Touch Sense switch: A touch-operated switching option.
• TSB Touch Sense Egress Bar and DSB Dual Sense Egress Bar: Egress hardware options for compatible installations.
• XMS Exit Motion Sensor: A motion-sensing option for compatible exit control systems.
• WSS-WSD Wave Sense Switch: A wave-activated switching option.
• DPS Door Position Switches and LM Latch Monitors: Components for compatible door-position or latch-status monitoring.
• BA-DPA Drop Prop Alarm Monitoring: A monitoring product for compatible applications.

Do not select an exit button, sensor or egress bar by product name alone. Verify the control sequence, release behavior, system compatibility and applicable code requirements for the installation.

Securitron Keypads, Key Switches and Access Control Components

The Securitron range includes devices for controlling or monitoring access, including digital keypads, key switches, access control boards, relays and related components.

• DK-12, DK-16 and DK-26 digital keypad systems: Options to review for compatible keypad-based access control applications.
• KP1 tubular keyswitch and MK mortise keyswitch: Key-operated control options for compatible installations.
• PDB access control boards: Board options for compatible control and relay configurations, including products with fire alarm interfaces.
• RB relay board and RLP relay logic pack: Components for compatible relay and control logic requirements.
• R100 Aperio card reader: A reader listed as factory-paired with a Wiegand hub.
• DT-7, TM-2 and TM-9 timers: Timing components for compatible control applications.

Check the system architecture, voltage, wiring, communication interface and control requirements before combining keypads, readers, relays, timers and locking hardware.

Securitron Magnalock Brackets and Installation Accessories

Mounting hardware is an important part of a successful electromagnetic lock installation. The correct bracket and accessories depend on the door design, frame geometry, mounting surface and lock model.

• Z-brackets and adjustable Z-brackets: Options for compatible Magnalock mounting arrangements.
• GDB Glass Door Bracket: A bracket option for compatible glass-door installations.
• ASB-32 Aluminum Spacer Bracket: A spacer option for compatible Magnalock installations.
• CWB-32 Concrete Wood Bracket: A bracket for specified mounting conditions.
• HEB Header Extension Brackets and UHB Universal Header Brackets: Options to address compatible header and mounting configurations.
• SMXX Surface Mount Kit: A mounting accessory for compatible Magnalocks.
• FMB9-4 and FMK Flex-Mount Gate Lock Bracket Kits: Options for compatible gate-lock installations.
• CEPT and SEPT electrical power transfers: Components to review when electrical connections must be transferred through a compatible door arrangement.

The product range also includes sex bolts, stop filler plates, dress covers, mounting kits, installation templates, door cords and other accessories. Verify the exact lock model and mounting configuration before ordering accessories.

How to Choose the Right Securitron Products

Use these checks when selecting a Magnalock, power supply or access control accessory.

1. Identify the application. Determine whether you need an electromagnetic door lock, cabinet lock, gate lock, exit control device or power component.
2. Confirm holding force. Match the lock's rated holding force to the application and verify that the complete door assembly is suitable.
3. Check door and frame construction. Review whether the opening is aluminum, glass, wood, hollow metal or another construction, and confirm the required bracket or mounting method.
4. Verify electrical requirements. Confirm operating voltage, current draw, power supply capacity and wiring requirements.
5. Choose monitoring options. Determine whether the system requires magnetic bond monitoring, door position monitoring or latch monitoring.
6. Review egress and fire alarm requirements. Confirm release behavior, required emergency release methods and applicable building and life-safety codes.
7. Check accessory compatibility. Match brackets, armatures, mounting kits, power transfers and control components to the specific model.
8. Confirm availability and documentation. Check the product listing, current manufacturer's specifications and stock status before ordering.

Securitron Product Catalog

For model-specific dimensions, wiring, mounting instructions and electrical specifications, consult the Securitron catalog available from TM Hardware. Check the manufacturer's current documentation if you need to verify the latest specifications or product availability.

Browse the Securitron products listed on this page to compare Magnalocks, power supplies, mounting brackets, exit devices and access control components for your project.

Frequently Asked Questions

What is a Securitron Magnalock?

A Securitron Magnalock is an electromagnetic lock used in compatible access-controlled openings. The appropriate model depends on the required holding force, door and frame construction, mounting arrangement and system requirements.

What is the difference between the Securitron M32, M62 and M82?

The main difference is their rated holding force. The M32 is rated at 600 lbs, the M62 at 1,200 lbs and the M82 at 1,800 lbs. The M32 and M62 are also available in configurations with different monitoring options. Confirm the specifications of the exact model before purchasing.

Which Securitron Magnalock is suitable for outdoor use?

The manufacturer identifies models such as the M32, M62 and M82 as weather-resistant. Other models have different environmental ratings. Verify the exact product's published rating and installation requirements before specifying a lock for an exposed location.

What Securitron power supply do I need?

The correct power supply depends on the voltage and total current draw of all connected devices, including locks, readers and control equipment. The Securitron range includes AQD series switching power supplies and AQL intelligent power systems. Calculate the complete system load and check the manufacturer's specifications before choosing a unit.

What accessories are available for Securitron Magnalocks?

Available accessories include mounting brackets, armature-related components, dress covers, filler plates, installation kits, power transfers and monitoring components. Compatibility varies by lock model and mounting configuration.

Where can I find Securitron product specifications?

Start with the Securitron catalog and the individual product listing on TM Hardware. Verify the current manufacturer's documentation for dimensions, electrical requirements, installation instructions and certifications.

For more options, explore our electromagnetic locks category to compare additional magnetic locking solutions for commercial doors and access control systems.